Set the main command of a trigger
The Main command fires when the trigger activates. A trigger fires one command, usually a camera angle.- In the Main command section, click Select camera angle.
- Pick a camera, then the angle to cut to, and click Use angle.
How a camera angle is checked with Camera Assist
When a trigger points at a camera angle, the Audio Manager checks the cut with Camera Assist. A cut that Camera Assist does not confirm in time is cancelled, and the studio goes to its fallback. This check covers camera angles only. A trigger that fires another command, like a switcher input or a macro, is not checked.Add alternatives with conditions
A trigger can pick a different shot depending on which program is on air or who is hosting. Click Add an alternative to add another command, then Add condition on it.- Host - The program host is, or is not, one of the hosts you pick.
- Program - The program on air is, or is not, one of the programs you pick.
- No default command - If none of the conditions match, nothing fires. Add a command without conditions at the bottom.
- This command will never play - A command without conditions sits above it and always matches first. Move it lower.
Add a pre-shot
Pre-shot is off by default. Turn it on under Advanced in the trigger editor. A Pre-shot section then appears above the main command. Pick the shot there, the same way as a main command. What a pre-shot does depends on what it points at:- A camera angle, with Camera Assist - The camera moves to the angle off air, before the cut.
- Another command - The pre-shot is a cut that goes on air. It plays as a short establishing shot, like a wide of the studio, for the Pre-shot duration, 0 to 60 seconds. Then the trigger cuts to its main shot.
Add alternative angles for long turns
On a long speaking turn, one shot gets static. With Alternative angles, the Audio Manager briefly cuts from the main shot to another angle, then returns. Open Alternative angles in the trigger editor and add each angle. Alternative angles have no conditions and no order: each time, the Audio Manager picks one at random. How often it cuts away is the Variety interval of the studio, 8 seconds by default. It is the same for every trigger in the studio. See Studio audio settings. The trigger list shows an Alt badge with the number of alternative angles, like Alt 3.Add a release command
When a trigger releases, the camera goes back to the studio fallback on its own. You don’t need a release command for that. Add a Release command only for something in between, like briefly holding on a wide before the fallback. Once you add one, the After release block decides what follows it:- Return to studio fallback on - After the release command, the trigger waits Wait before fallback, 0 to 60 seconds, then cuts to the fallback.
- Return to studio fallback off - The release command stays on air and the studio fallback is skipped.