The trigger list during a show
Each trigger is a row with a status light. The light turns red while the trigger is on air.- LIVE - The trigger is active and has the camera. A red bar runs across the top of its editor.
- UNAVAILABLE - The audio device of this trigger is disconnected. The trigger can’t fire.
- DISABLED - The trigger is turned off. The row is dimmed.
Meter every mic
Switch the header to Live metering to see every trigger as a channel strip:- A meter from -96 to +12 dB, green up to -18, yellow up to -6, red above. A held peak marks the loudest moment and a clip light shows at -0.5 dB.
- The threshold as a fader on the meter, see Thresholds and calibration.
- Voice, an indicator that the mic hears a voice, and Floor, the measured background of the mic.
- The angle the trigger cuts to.
Pause audio switching
When the studio has a gating signal, its toggle sits in the header of the Audio triggers page. Switch it off to stop audio switching, for example for a moment where the director takes the cameras by hand. The fallback keeps running. Switch it back on to hand control back to the Audio Manager.Recent activity
With no trigger selected, the right side shows Activity: the latest activations on a timeline. Use the zoom to show 10 to 60 minutes, and Full history to open the activation history. An open trigger also lists its own last 10 activations, each with how long it was on air.Look back in the activation history
Audio Manager → History shows which mic held the floor over the last 30 days, on a timeline you can scrub.- Move by hour with Earlier and Later, jump to a date with the date picker, or go back to Now.
- Filter on Triggers and Types.
- Zoom from 10 to 60 minutes.
- Switch between Vertical (lanes) and Horizontal (per trigger).