Skip to main content
The Audio Manager is rebuilt. It listens for speech instead of loudness, holds a 2-shot during a conversation, points straight at your camera angles and shows you what every mic is doing. This page lists what changed and why, then what happens when your studio moves over from the previous Audio Manager. The new Audio Manager is version 4.8.5. The previous Audio Manager and the previous Core are supported until 21 December 2026.

It listens for speech, not loudness

What changed. The previous Audio Manager measured how loud a channel was. The new one listens for a voice. How it works now. On a voice trigger, the Audio Manager looks at the voice band of the mic and at the rhythm and pitch of speech. A short burst, like a cough or a knock on the desk, is held back. This is on for the Human speaking, Human speaking external and Voice call trigger types. Music and Programmed action tone triggers work as before. Why. Loudness can’t tell a presenter from a song on the monitors. Music, hum and coughs now fire a trigger less often. Bleed is not solved: a voice picked up by a mic with a closed fader stays hard to tell apart. See Audio triggers.

Trigger groups and the Smart Director

What changed. A conversation gets its own shot. The previous Audio Manager had no trigger groups. How it works now. A trigger group is one shot for a group of mics, like a 2-shot of the host and the guest. It fires when two or more of them talk at once, or keep answering each other. The Smart Director holds that 2-shot while the conversation runs and goes back to a single when one person keeps talking. On a long turn it cuts to one of the trigger’s alternative angles now and then. Why. Two people in a conversation belong in one picture. One person with a long answer gets their single back. The Smart Director only acts when the studio has trigger groups. See Trigger groups and the Smart Director settings.

Triggers point at a camera angle

What changed. A trigger points straight at a camera angle. You no longer need a command in between. How it works now. You pick the camera and the angle in the trigger, and you can edit the angle from there. For a trigger that points at an angle, the Audio Manager checks the cut with Camera Assist. A cut that is not confirmed in time is cancelled, and the studio goes to its fallback. With a pre-shot on such a trigger, the camera moves to the angle off air before the cut. Why. You set the shot in one place, and a cut that is not confirmed ends on your fallback. The check and the off-air pre-shot cover camera angles only, not other commands. Pre-shot is off by default. See Choose what a trigger fires.

Calibration and mic presets

What changed. A guided calibration sets the threshold of a mic, and mic presets cover mics that are not processed at the console. How it works now. Calibrate runs three steps for a trigger: Stay quiet, Talk normally, then a recommended margin above that mic’s own background. After calibration the trigger fires on that margin instead of on a fixed level. For a mic that is not processed at the console, you turn off Post processing on its input and pick a mic preset, like a Shure SM7B or a Neumann U 87 Ai. Inputs are marked as post-processed by default, and an input with a mic preset can’t be calibrated. Why. Every mic and every room has a different background level. A margin above that background fits the mic it was measured on. See Thresholds and calibration and Set up an unprocessed mic.

Metering and audio history

What changed. You can see what the Audio Manager hears, now and afterwards. How it works now. Live metering shows a strip per mic with its level, a held peak, the measured background and a voice indicator. Audio Manager → History keeps 30 days of which mic held the floor, on a timeline you can scrub. A lane is a mic, not a person, and the history does not record why a camera was chosen. Why. When a cut looks wrong, you can check what the mics did at that moment. See Watch triggers on air.

Two pages instead of five

What changed. The previous Audio Manager had five pages: Triggers, Inputs, Matrix, Status and Plan. The new one has two: Triggers and History. How it works now. You create and tune triggers, trigger groups and their commands on the Audio triggers page, with metering in the same place. Inputs, the fallback and the Smart Director are in the studio’s audio settings, at Settings → Studio → Audio. Why. Fewer places to look. A trigger holds its input, its threshold and its shot in one editor. See Studio audio settings.

Moving from the previous Audio Manager

How the move happens

  1. The Machine Agent installs the new Audio Manager over the previous one. With automatic updates on, that happens in the night after the release.
  2. The first time the new Audio Manager connects, VRA Cloud moves the studio’s audio setup over. This runs once per studio, by itself.
  3. If it has not run, the Audio Manager pages in VRA Cloud show the A new Audio Manager is available banner. Click See the migration steps to open the Audio Manager migration page and follow its steps.
Audio switching stops while the new Audio Manager installs on the studio machine, also when the Machine Agent installs it by itself. Don’t start the move by hand during a show.
There is no way back to the previous Audio Manager in the app once a studio has moved.

What is carried over

  • Your audio devices and inputs
  • Your triggers, with their name, type, priority and threshold
  • The conditions on your triggers
  • The talk time
  • The fallback
  • Commands that switched to a camera angle now point at that angle

What to do by hand afterwards

1

Calibrate each mic

Triggers keep their previous fixed threshold. Run Calibrate on each trigger so it uses a margin above that mic’s own background. See Calibrate a trigger.
2

Create trigger groups

The previous Audio Manager had no trigger groups, so the Smart Director has nothing to hold yet. Create a group for the mics that talk together. See Trigger groups.
3

Check triggers that had several commands

A trigger takes one main command. If a trigger had several commands, open it after the move and check its Alternative angles. Add any that are missing. Check its Release command the same way. See Add alternative angles.
4

Review two Smart Director values

Return to single after is taken from your previous Keep Active Speaker Time, and Variety interval from your previous Dynamic Switching Time. Check that both still fit. See Smart Director.