Skip to main content
The fallback is what goes on air when no presenter is talking, like a wide of the studio during a song. It starts when all Human speaking triggers are inactive. You set it up per studio at Settings → Studio → Audio, in the Fallback settings box. Always set a fallback. Without one, a trigger that releases leaves the camera where it is, on a presenter who has stopped talking.

Set the Audio Manager fallback

  1. Under Fallback command, click Select camera angle and pick the shot, usually a wide or a 2-shot.
  2. Set the Initial delay, how long the studio has to be quiet before the fallback starts. Default 0.
  3. Click Save configuration.
If a fallback command is already set in your camera settings, the box offers Add Camera Settings Fallback to reuse it.

Use a different fallback per program or host

With Enable rundown off, the fallback can pick a different shot depending on which program is on air or who is hosting. Click Add an alternative, then Add condition on it and pick a Host or Program. The list is read from the top and the first command whose conditions match goes on air. Keep one command without conditions at the bottom as the Default. Without it the box warns No default command, and the fallback does nothing when no condition matches. Conditions work the same way as on a trigger, see Choose what a trigger fires.

Run a fallback rundown

One fallback shot gets static during a long song. Turn on Enable rundown to run several fallback commands in order:
  1. Click Add another command for each shot and drag them into the order they should play.
  2. Set the Timeout between commands, how long each one holds before the next. It can’t be shorter than 100 ms or the studio Damping.
The list shows the wait before each step, so you can read the rundown top to bottom.

Fallback after a trigger releases

Every trigger returns to the studio fallback on its own when it releases. A trigger with a release command can skip the fallback, or wait before it, with Return to studio fallback and Wait before fallback.

When the fallback is on air

The trigger list shows Fallback active at the bottom while the fallback runs. The fallback keeps running while the gating signal is off. Audio switching stops, but the picture doesn’t freeze on the last speaker.