> ## Documentation Index
> Fetch the complete documentation index at: https://docs.visualradioassist.live/llms.txt
> Use this file to discover all available pages before exploring further.

> ## Agent Instructions
> Use the names from the glossary at https://docs.visualradioassist.live/glossary: Audio Manager (two words), command (never commando), on air and off air (never live) for programs and studios, and server apps for the VRA apps installed in the studio.
> Say which app an answer applies to, like VRA Cloud, the Core or the Output Player, and the version when the page names one.
> Only give settings, values and steps that are in these docs. Never invent one. If the docs don't cover it, say so.
> When the docs don't answer the question, send the user to Visual Radio Assist support at https://cloud.visualradioassist.live/support.

# Choose what a trigger fires

> Point an Audio Manager trigger at a camera angle, vary the shot per program or host, add a pre-shot and alternative angles, and set what happens on release.

When a trigger becomes active it fires one command, and when it releases it can fire another. This page covers every command on a trigger: the main command and its alternatives, the pre-shot, the alternative angles during a long turn, and the release command.

## Set the main command of a trigger

The **Main command** fires when the trigger activates. A trigger fires one command, usually a camera angle.

1. In the **Main command** section, click **Select camera angle**.
2. Pick a camera, then the angle to cut to, and click **Use angle**.

A trigger points straight at the camera angle, you don't need a separate command for it. Click **Edit angle** on the row to change the angle itself without leaving the trigger.

For anything other than a camera angle, click **Or trigger a different command** and use the **Other command** tab.

> [!TIP]
>
> Need several actions in sequence, like a camera angle and a graphic? Build them
> into a [macro](https://docs.visualradioassist.live/macros.md) and pick the macro as the command.

## How a camera angle is checked with Camera Assist

When a trigger points at a camera angle, the Audio Manager checks the cut with [Camera Assist](https://docs.visualradioassist.live/cameras.md). A cut that Camera Assist does not confirm in time is cancelled, and the studio goes to its [fallback](https://docs.visualradioassist.live/audio-manager/fallback.md).

This check covers camera angles only. A trigger that fires another command, like a switcher input or a macro, is not checked.

## Add alternatives with conditions

A trigger can pick a different shot depending on which program is on air or who is hosting. Click **Add an alternative** to add another command, then **Add condition** on it.

* **Host** - The program host is, or is not, one of the hosts you pick.
* **Program** - The program on air is, or is not, one of the programs you pick.

Each condition is a pill with **is**, **is any of** or **is not**. With several pills on one command, click the operator between them to switch between **AND** and **OR**.

The list is read from the top. The first command whose conditions match fires, and the rest are skipped. The command without conditions is the **Default**, the one that fires when nothing above it matches. Use **Move higher** and **Move lower** to change the order.

Conditions never make a trigger fire. The trigger still fires on audio, conditions only choose which command it sends.

The editor warns you about two mistakes:

* **No default command** - If none of the conditions match, nothing fires. Add a command without conditions at the bottom.
* **This command will never play** - A command without conditions sits above it and always matches first. Move it lower.

## Add a pre-shot

**Pre-shot** is off by default. Turn it on under **Advanced** in the trigger editor. A **Pre-shot** section then appears above the main command. Pick the shot there, the same way as a main command.

What a pre-shot does depends on what it points at:

* **A camera angle, with Camera Assist** - The camera moves to the angle off air, before the cut.
* **Another command** - The pre-shot is a cut that goes on air. It plays as a short establishing shot, like a wide of the studio, for the **Pre-shot duration**, 0 to 60 seconds. Then the trigger cuts to its main shot.

## Add alternative angles for long turns

On a long speaking turn, one shot gets static. With **Alternative angles**, the Audio Manager briefly cuts from the main shot to another angle, then returns.

Open **Alternative angles** in the trigger editor and add each angle. Alternative angles have no conditions and no order: each time, the Audio Manager picks one at random.

How often it cuts away is the **Variety interval** of the studio, 8 seconds by default. It is the same for every trigger in the studio. See [Studio audio settings](https://docs.visualradioassist.live/audio-manager/studio-audio-settings.md#smart-director).

The trigger list shows an **Alt** badge with the number of alternative angles, like **Alt 3**.

## Add a release command

When a trigger releases, the camera goes back to the studio [fallback](https://docs.visualradioassist.live/audio-manager/fallback.md) on its own. You don't need a release command for that.

Add a **Release command** only for something in between, like briefly holding on a wide before the fallback. Once you add one, the **After release** block decides what follows it:

* **Return to studio fallback** on - After the release command, the trigger waits **Wait before fallback**, 0 to 60 seconds, then cuts to the fallback.
* **Return to studio fallback** off - The release command stays on air and the studio fallback is skipped.

Without a studio fallback, a released trigger leaves the camera where it is.

## Fix a trigger with a missing angle

When a camera angle used by a trigger is deleted, the trigger shows **This angle no longer exists** and can't be saved until you pick a new angle.

## Related

* [Audio triggers](https://docs.visualradioassist.live/audio-manager/audio-triggers.md)
* [Trigger groups](https://docs.visualradioassist.live/audio-manager/trigger-groups.md)
* [Fallback](https://docs.visualradioassist.live/audio-manager/fallback.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.