> ## Documentation Index
> Fetch the complete documentation index at: https://docs.visualradioassist.live/llms.txt
> Use this file to discover all available pages before exploring further.

> ## Agent Instructions
> Use the names from the glossary at https://docs.visualradioassist.live/glossary: Audio Manager (two words), command (never commando), on air and off air (never live) for programs and studios, and server apps for the VRA apps installed in the studio.
> Say which app an answer applies to, like VRA Cloud, the Core or the Output Player, and the version when the page names one.
> Only give settings, values and steps that are in these docs. Never invent one. If the docs don't cover it, say so.
> When the docs don't answer the question, send the user to Visual Radio Assist support at https://cloud.visualradioassist.live/support.

# Fallback

> Set the Audio Manager fallback: the shot that goes on air when nobody is talking, a rundown of shots for long songs, or a different shot per program.

The fallback is what goes on air when no presenter is talking, like a wide of the studio during a song. It starts when all **Human speaking** triggers are inactive. You set it up per studio at **Settings → Studio → Audio**, in the **Fallback settings** box.

Always set a fallback. Without one, a trigger that releases leaves the camera where it is, on a presenter who has stopped talking.

## Set the Audio Manager fallback

1. Under **Fallback command**, click **Select camera angle** and pick the shot, usually a wide or a 2-shot.
2. Set the **Initial delay**, how long the studio has to be quiet before the fallback starts. Default 0.
3. Click **Save configuration**.

If a fallback command is already set in your camera settings, the box offers **Add Camera Settings Fallback** to reuse it.

## Use a different fallback per program or host

With **Enable rundown** off, the fallback can pick a different shot depending on which program is on air or who is hosting. Click **Add an alternative**, then **Add condition** on it and pick a **Host** or **Program**.

The list is read from the top and the first command whose conditions match goes on air. Keep one command without conditions at the bottom as the **Default**. Without it the box warns **No default command**, and the fallback does nothing when no condition matches.

Conditions work the same way as on a trigger, see [Choose what a trigger fires](https://docs.visualradioassist.live/audio-manager/trigger-commands.md#add-alternatives-with-conditions).

## Run a fallback rundown

One fallback shot gets static during a long song. Turn on **Enable rundown** to run several fallback commands in order:

1. Click **Add another command** for each shot and drag them into the order they should play.
2. Set the **Timeout between commands**, how long each one holds before the next. It can't be shorter than 100 ms or the studio **Damping**.

The list shows the wait before each step, so you can read the rundown top to bottom.

## Fallback after a trigger releases

Every trigger returns to the studio fallback on its own when it releases. A trigger with a [release command](https://docs.visualradioassist.live/audio-manager/trigger-commands.md#add-a-release-command) can skip the fallback, or wait before it, with **Return to studio fallback** and **Wait before fallback**.

## When the fallback is on air

The trigger list shows **Fallback active** at the bottom while the fallback runs.

The fallback keeps running while the [gating signal](https://docs.visualradioassist.live/audio-manager/studio-audio-settings.md#gating-signal) is off. Audio switching stops, but the picture doesn't freeze on the last speaker.

## Related

* [Choose what a trigger fires](https://docs.visualradioassist.live/audio-manager/trigger-commands.md)
* [Studio audio settings](https://docs.visualradioassist.live/audio-manager/studio-audio-settings.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.